Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This isn't a tractor review but a technique video: a homestead owner demonstrates how to angle a 5-foot King Cutter brush hog on a Kubota L2501 for pasture mowing versus attacking thick brush and small trees. He covers top-link leveling, skid-shoe setup, why standard brush hog edges bend, forward/backward attack angles around stumps, and keeping cut brush from fouling the tractor underbelly. Best for owners already running a brush hog who want real-world technique, not spec or buying info.
Posted by the Piney Grove Homestead channel, run by a homesteader sharing hands-on experience from their own 20-acre property rather than dealer or manufacturer content.
Adjust the top link so the bottom edge is parallel to the ground and the skid shoe barely touches, with the tail wheel showing a little weight, then adjust stabilizers and keep blades sharp.
Raise the brush hog a little higher so it bends the brush or tree over and the spinning blades chop it before it can fold under the deck, then lower it to grind the stump.
The front edge of the deck is a weak point that curls under when it hits stumps or brush even around one to two inches thick, transferring pressure to the pins and brackets.
Go forward and backward instead of driving over bent brush and backing up, which keeps the area clean and stops material from getting caught near electrics and fuel lines.