Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operated step-by-step walkthrough of the 50-hour hydraulic service on a Branson 2515h, covering both drain plugs (locations, socket size, O-ring checks, magnetic plug inspection), both hydraulic filters (part numbers, prices, removal tips, install torque), fluid spec (J-20C, roughly nine gallons), and a brief mention of the front axle gear oil still needed. Useful for owners doing this service themselves for the first time.
It has two hydraulic filters, a bigger white one and a smaller one, because the tractor has two separate hydraulic pumps.
Both drain plugs are 17 millimeter socket size, located under the rear axle housing area.
J-20C spec fluid, about nine gallons total, which the owner says is pretty expensive at 75 dollars for a five gallon bucket.
The front axle holds about three quarters of a gallon of straight 90 weight gear oil on each side.