Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An official step-by-step walkthrough from Yanmar covering the complete oil change procedure for the YT3 series, including service intervals (50-hour initial, then every 200 hours), exact tools and socket sizes, filter installation details, and model-specific oil capacities (8 quarts for the YT359, 7 for the YT347). It closes with resetting the panel meter service interval. Most useful as a straightforward reference for first-time YT3 owners doing this job themselves.
Posted by the YANMAR America channel, so this is manufacturer-produced instructional content rather than independent owner or reviewer commentary.
Initially at 50 hours, then at 200 hours, and every 200 hours after that.
Eight quarts of engine oil, compared to seven quarts for the YT347.
A maintenance kit, waste oil drain pan, funnel, filter wrench, ratchet, 10mm socket, 17mm socket, gloves, glasses, shop rags, and wheel chocks.
Apply clean oil to the gasket, install by hand until the gasket seats, then use a filter wrench to turn it an additional half turn.
