Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on how-to from an experienced eMax 20S owner focused specifically on removing and reinstalling the front loader on uneven terrain. He walks through a rear-wheel alignment trick for leveling the bucket, step-by-step hydraulic hose disconnection, and, most usefully, identifies easy-to-miss greasing points and a hydraulic hose chafing issue unique to the eMax. Best for eMax owners doing their first loader removal.
Drop the bucket down and align the top of the bucket with the bottom of the rear wheel, since the rear wheels connect to the frame that holds the loader supports.
The locking pinholes on the loader attachment points are often missed. Old grease wears shiny from friction, showing where fresh grease is needed.
Yes, the hydraulic hose that feeds the loader was rubbing on a sharp edge, so the owner added scuffing pads above and below it to prevent chafing.
The hoses are color coded. Start with the bottom one first, connect all four carefully since they sit close together, then wipe off excess fluid.