Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on one overlooked Kubota BX habit: raising and locking the mid-mount mower lift arms when the deck is off to prevent them from hanging low and bending on rocks or stumps. The owner also walks through the physical adjustment behind the rear tire, loosen a jam nut, tighten a 17mm bolt, when the height knob won't reach the top position. Quick and practical for BX owners who swap implements regularly.
If left low they hang down with little clearance and can catch a rock or stump, bending the arms, requiring replacement or straightening.
Raise the three-point hitch and set the cutting height adjustment knob to the top setting, which holds the arms in the upward position.
Use a 17mm wrench to loosen the jam nut behind the rear tire, tighten the bolt in until the knob reaches top, then snug the jam nut.