Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a full DIY teardown of a Farmall 45A that wouldn't move in forward or reverse, tracing the fault to a broken roll pin in the shuttle shift, deep inside the transmission case. The video shows splitting the tractor (fenders, hydraulic and brake lines, driveshaft, top cover), replacing the pin, and the careful reassembly process, ending with a test drive through the gears. Best for owners facing an identical shuttle-shift failure and willing to split the tractor themselves.
The video traces it to a broken roll pin inside the transmission case where the shuttle shift linkage goes in, found after splitting the tractor.
Fenders, footplates, hydraulic lines, brake lines, wiring harness, the four wheel drive driveshaft, and the top cover before unbolting the two halves apart.
Line up all shafts and bearings, then gently wiggle the halves together using slight bolt tension while turning the wheels, never forcing it together.
Yes, flange sealant is applied as a continuous bead between the two surfaces to form a gasket and prevent oil leaks.