Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow, practical demo focused entirely on the Command Cut deck-height system found on the 2032R and 2038R, not a full tractor review. The owner cycles through settings one through six, measuring actual cutting height at each on his driveway (roughly half an inch up to about four and three-quarter inches), and demonstrates the lever's bump-adjust feature for fine-tuning between settings. Good for buyers specifically wondering how Command Cut height numbers translate to real inches.
An owner-operator demonstrating a feature on his own tractor, sharing hands-on impressions rather than a scripted or sales-driven review.
| John Deere 2038R | John Deere 2032R | |
|---|---|---|
| PTO horsepower | 30.4 hp | 24.2 hp |
| Loader lift capacity | 1,949 lbf (at pivot pin) | H130: 2,363 lbf; 220R: 1,949 lbf (at pivot pin) |
| 3-point lift capacity | 1,356 lb | 1433 lb |
| Hydraulic flow | 5.3 gpm | 5.3 gpm |
