Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on one overlooked grease zerk on the Kubota BX's hydrostatic treadle pedal, the one that, when neglected, can cause the tractor to not start. The owner shares a first-person story of being stranded, shows exactly where the fitting hides under the seat, demonstrates greasing it, and briefly points out the torsion dampener and forward/reverse speed stops. Best for BX owners puzzled by a no-start condition or filling gaps in their greasing routine.
The hydrostatic treadle pedal grease fitting may be ungreased, causing the pedal to freeze in forward or reverse instead of returning to neutral, which blocks starting.
It is under the seat, accessed by flipping up a small pad; from underneath you can follow the rod up to the treadle pedal and frame pass-through hole.
Move the treadle pedal to center it manually; this released the stuck pedal and let the tractor fire right back up in the owner's case.
They are forward and reverse safety stops; tightening the forward bolt increases forward speed and the reverse bolt adjusts reverse speed.