Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an owner's practical workaround video, not a product overview: using a TYM 4820 CH with pallet forks (no grapple yet) to pull and haul small trees with a chain, explaining how to balance loads on bare forks, secure them with rope or chain instead of bungee straps, and judge safe lifting weight versus height and reach without a rear counterweight. Useful for current TYM 4820 owners wanting fork-handling tips, not shoppers comparing specs.
Posted by an individual TYM 4820 CH owner sharing hands-on experience from his own property work, with about 29 hours on the machine.
Use pallet forks: wrap a chain around the trees to pull them out, then balance the load on the forks and drive slowly to haul them where you need to burn them.
Use heavy rope or a chain wrapped over the top and under the bottom of the load. It won't be as tight as a grapple but can secure it enough to move safely.
If a bungee strap isn't hooked in properly or it snaps, it can fly up and hit you, causing serious injury; the speaker's uncle lost about three teeth this way.
Consider how much weight is on front, how fast you're going, and how high you lift it. Weight lifted higher or farther out increases the pull on the tractor.