Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A practical DIY walkthrough of the complete hydraulic fluid and filter service on a Branson 3520R, showing the actual drain plug removal, screen pull and cleaning, filter swap with ring lubrication, and refill using Traveler universal hydraulic fluid from Tractor Supply. The sight-glass fill level and vent check get real attention. Best for owners doing this job themselves for the first time and wanting to see the steps in sequence.
A 17 mm wrench for the drain plug, a 3/8 socket with a 12 mm socket for the screen cap, rags, and buckets to catch the oil.
The video uses Traveler transmission hydraulic fluid universal, purchased in two five gallon buckets from Tractor Supply.
Fill using the sight glass until the fluid reaches the red dot or bead in the middle, then let it settle and recheck after running the tractor.
Yes, the screen is pulled out, cleaned and dried, with a bit of oil added to the seals before reinstalling it.