Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A real-world owner walking through the 400-hour transmission and HST filter oil change on a Kioti KL2510, told honestly, including two extra trips to the store to find the right socket size (1-3/16" for the main drain plug, 9/16" for the rear plugs) and an hour-and-a-half battle with a stubborn transmission filter. Fluid capacity discrepancy between the manual and dealer is noted. Best for KL2510 owners tackling this service themselves for the first time.
The main center transmission drain plug takes a 1-3/16 inch socket, which fit snug without stripping the bolt.
The two rear drain plug bolts, which are coated orange, take a 9/16 inch socket.
The manual says over five gallons, listing 5.42 gallons, but the dealer said it takes about five gallons, maybe a little more.
Yes, the owner said it took about an hour and a half and required two trips to Auto Zone for a better oil filter wrench to reach it under the belly mower setup.