Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a full teardown-and-rebuild of a cracked rear transmission/axle case on a 1994 Ford/New Holland 1715, caused by an improperly-sized PTO driveshaft punching through the casting. It walks through disassembling the differential, ring and pinion, PTO shifter fork, and detents, sourcing a used replacement case, reassembling with RTV sealant, plus incidental muffler and wiring fixes. Useful for owners facing similar PTO-driven case damage or wanting a real hands-on repair walkthrough.
An improperly sized PTO driveshaft can get punched through the cast iron case when the hydraulic lift is stronger than the casting, which happened when a rototiller was lifted fully.
Make sure it extends long enough to set the implement down without flopping apart, and can be lifted fully without compressing all the way to the stop.
Disassembling the differential, ring and pinion, PTO shifter fork and detents, swapping in a used case, then reassembling with a bead of RTV sealant on the case face.
No, the castings are no longer manufactured, though a part number still exists; a used case had to be sourced through a dealer contact.