Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator's first-time walkthrough of replacing a leaking front axle seal on a Kioti CK3510SE at 275 hours. The video follows the actual repair in real time, tire and hub removal, snap-ring extraction, seal swap using improvised pipe tools, RTV reassembly, and refilling with Amsoil 80W90, including honest stumbles like a slightly mis-seated seal and forgotten torque specs. Best for DIY owners facing the same leak.
An owner-operator documenting hands-on repairs and property work on their own Kioti tractor, with no evident dealership or commercial affiliation.
Remove the tire, tie rod, and hub bolts, pull the snap ring inside, swap the old seal for the new one using a pipe as a seal pounder, then reseal with RTV and reassemble.
The manual calls for SAE 90 weight or better gear oil. The owner used Amsoil Severe Gear 80W90 and filled it to six gallons per the owner's manual.
You need snap ring pliers strong and large enough to rotate and pull the snap ring; the owner lacked the ideal pliers but used a bigger set that worked.
The owner states you should change the front axle fluid around 300 to 400 hours, and did so early at 275 hours during this seal repair.
