Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A brief owner-led walkthrough of changing the engine oil on a New Holland Workmaster 50, covering drain bolt location, filter removal in a tight space, fill plug access, and a tip about raising the loader to reach the dipstick. It also touches on checking hydraulic fluid while you're at it. Light on specs but useful for first-timers doing their own maintenance.
Posted by the K Felix channel, with the presenter identifying as an owner sharing hands-on maintenance experience.
At the bottom of the oil pan there is a hex bolt you unscrew to drop all the oil in the engine.
The filter sits in a tight position but you can reach it with a basic filter wrench or wrench pliers, gripping and twisting it off.
The dipstick is hidden in a tight spot, but if you have a loader on front, raise it up to get your hand in there.
Remove the nut with a dipstick attached, located between the parking brake and the seat on the center transmission part of the tractor.
