Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A real owner working through an unplanned portal axle downshaft repair on his MF 1835E, not a tutorial but an honest, unscripted documentation of the job as it unfolds, including wrong turns, stubborn freeze plugs, a broken shaft stuck in the upper housing, and bearing/seal fitment challenges solved with freezer and oven tricks. Ends with reassembly, fluid fill, and a confirmed working 4WD. Best for owners facing the same failure who want to know what they're getting into.
Turn each hub by hand. The side with no resistance and no sound in the center is the broken side, while the working side shows movement in the center.
The owner put the bearing in the freezer to contract it and considered heating the housing in the oven at 150 degrees to make the bearing press in easier.
Yes, after reassembly and filling the axles with fluid, the owner tested the tractor and confirmed four-wheel drive was working again.