Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a short, hands-on fix for a specific annoyance: the TYM 574's loader joystick sitting too far out for comfortable reach. The owner walks through popping off plastic trim clips, loosening nuts to rotate the joystick closer to the operator, and reassembling the cover and locking bracket. It's narrow in scope but genuinely practical for anyone with this same reach issue on a new TYM 574.
Posted by the Ratliff Farmstead channel, an owner working through tractor adjustments on their own homestead.
Pop off the plastic trim clips, remove the cover, loosen the top nut and other nuts, then spin and twist the joystick to the desired position before retightening.
Pull the boot back down into its groove so it snaps in, slide the cover back on, and pop the plastic clips back into place.
Yes, there is a small bracket with a lever that pushes in to lock the joystick, which is useful when transporting the tractor.
