Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on one specific technique: how to back-drag with a front-end loader without damaging the bucket cylinders. The video explains why fully-extended cylinders are vulnerable, covering packings, bushings, bending risk, and leverage mechanics, then shows the owner's preferred bucket angle and float-function approach. A short, practical tip video most useful to new compact-tractor owners who've heard conflicting advice on this topic.
An owner-operator named Ed who runs a Kubota B2601 on a 33-acre farm and shares DIY and land-management content from that hands-on perspective.
Fully extended cylinders have packings, bushings and O-rings near the tip that can leak or break under the jerking and pulling force of back dragging.
Keep the bucket dumped no more than about 45 degrees, often nearly flat or just curved down slightly, using the float function while curling back.
Yes, excessive force when extended can bend the cylinder rod area, causing poor retraction, leaks, and overall weaker performance.
