Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealer or installer doing a pre-sale walkaround of the LS LW3150 two-stage snow blower on the MT1-series tractor. Covers the auger and impeller design, shear bolts, skid shoes, replaceable edge, lubrication tips, and the two-piece subframe removal process using four pins and the mid-PTO drive. Brief footage of it running is included. Best for buyers deciding whether this implement suits their machine before purchasing.
Pull one pin to disconnect and drop the unit, drive backwards, then pull another pin to remove the subframe, which goes all the way under the tractor.
It runs off the tractor's mid PTO setting, with a shaft running from the unit back to the mid PTO.
Use WD-40 generously; grease was discussed but avoided since it can hold onto rocks and debris.
Side to side chute movement is hydraulic and controlled through the loader control, while skid shoes are adjusted manually.
| LS Tractor MT122 | LS Tractor MT125 | |
|---|---|---|
| PTO horsepower | 15 hp | 17.2 hp |
| Loader lift capacity | LL1001: 1,836 lb (at pivot pin) | LL1001: 1,836 lb (at pivot pin) |
| 3-point lift capacity | 992 lb | 992 lb |
| Hydraulic flow | 4.6 gpm | 4.6 gpm |