Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real-time, hands-on 50-hour service walkthrough on an owner's own LX2610 ROPS, not a dealer overview. It covers draining engine oil, replacing the oil, transmission (HST), and hydraulic suction filters, refilling fluids to spec (including the 4-liter oil fill), greasing all six loader zerk points, and torquing the loader frame bolts to exact foot-pound specs. Includes an on-camera filter mix-up caught before damage. Best for owners planning to do this service themselves.
It is not under the 50-hour maintenance section. The directions for changing the oil are found under the 200-hour maintenance section of the owner's manual.
The manual states the tractor takes four liters of oil, which is about four quarts, plus a small additional amount to account for the metric conversion.
The hydraulic filter is marked suction filter and the transmission filter is marked filter HST. They are similar in size, so check the diagram and physically compare before removing one.
Bolts torque to a range of 91.5 to 108.4 foot-pounds, except for the number 3 bolts, which torque to 59 foot-pounds.