Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealer-produced step-by-step walkthrough of how to remove (and by implication reattach) the loader on a Mahindra 1100 Series using the MTS quick-attach system. It covers kickstand deployment, pin removal sequence, hydraulic line disconnect, and a few small tips like the built-in pin storage. Verbal instructions only, no specs or buying guidance. Most useful to new 1100 owners who want a reference before their first solo loader removal.
Raise the loader, deploy the kickstands, remove and reinsert pins, lower to an inch off the ground, tilt the bucket to loosen the frame pins, pull them, then use the loader handle to disconnect the frame and remove the hydraulic lines.
The Mahindra has a built-in spot on the loader to hold the big silver pins so they do not get lost while the loader is detached.
Turn the key off, relieve all pressure in every direction using the loader handle, then remove the hydraulic lines, which lift off and disconnect all hoses at once with one pin.