Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Mike walks through three specific pre-season checks for rotary cutters, greasing and separating the PTO shaft, inspecting for gearbox oil leaks, and checking oil level and condition, with real-world detail on milky oil, the grease-instead-of-oil farmer trick, overfilling risks, and PTO bind in hilly terrain. Practical depth throughout. Best for new rotary cutter owners wanting to avoid the repair bills Mike saw firsthand at a dealership.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Milky oil means water got into the gearbox, often from humid or rainy conditions, especially if the machine was stored outside.
Yes, it is an old farmer trick. Flowable grease lubricates the teeth and, unlike oil, often will not run out if the seal is leaking.
Back up and down ravines instead of driving straight through, since driving down then up puts the PTO shaft in a severe bind that can bend or break it.
Hook the shaft to the tractor without the bush hog attached and drive forward an inch or two to try pulling it apart, since penetrant is hard to apply with the shield on.