Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on buyer's guide to hydraulic top links for compact tractors, covering how to measure the correct retracted length for specific models (John Deere 1025R, 2038R, 3046R, 5E, Kubota LX3310), fitting differences, hose kit installation details including banjo fittings and thread sealant types, and a sponsored recommendation for AGR Store USA cylinders. Goes deeper than a quick overview; best for owners ready to purchase and install a hydraulic top link.
Measure your mechanical top link fully retracted, center to center, and get a hydraulic one the same retracted length to match your tractor's functionality.
Its ball joint is an inch and a half wide while most other cylinders, including Category 2 ones, use an inch and three quarter ball joints, causing fitment issues since Kubota didn't design to ASABE standards.
Only if using NPT pipe threads, which require Teflon tape or pipe sealant. Other thread types, including BPP, only need the copper washer to seal, no tape needed.
They send adapters including a copper washer for sealing, and you can source your own hydraulic hoses separately, such as from discount hydraulic hose.