Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner doing his own 50-hour service on a Kioti DK6010SE HST, this video covers engine oil (6.8 qts of 15W40, two drain plugs on a split pan) and hydraulic filter replacement with real part costs, roughly $95 DIY versus a $600 dealer quote. He shows filter locations, tools needed (strap wrench, crescent), and leak checks. Most useful for first-time DK6010 owners nervous about tackling this themselves.
It takes 6.8 quarts of 15W40 oil, which works out to about one full gallon jug plus 0.7 of a second gallon jug.
Just a crescent wrench, a 17mm socket on a regular ratchet, and a strap wrench set to remove the oil and hydraulic filters.
Yes, doing it yourself cost about $95 for oil and filters compared to a dealer quote of $600 for the same oil change and filter replacement.
No, at 50 hours you only replace the hydraulic oil filter, not the fluid; full hydraulic oil replacement happens at 100 hours.