Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow, practical how-to on one specific adjustment: the three-point hitch drop-speed dampening knob on a TYM T25. It shows a hands-on demonstration of lowering an implement too fast, then walks through tightening and loosening the knob to find the right descent rate, ending once the 'sweet spot' is found. Useful for T25 owners troubleshooting a hitch that drops too quickly, but it's a single-task clip, not a broader tractor overview.
Posted by the SR1 Equipment channel, presented as a hands-on maintenance demonstration rather than a sales pitch.
Turn the dampening knob to the right (tighten) to add pressure and slow the drop, then test by lowering the implement again.
It adjusts the dampening on the lift arm so an implement does not slam into the ground when lowered.
The lift arm stops moving at all, meaning you have gone too far and need to loosen it back slightly.