Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real-time, hands-on starter replacement on a New Holland TN75, shot by the owner working in a tight engine bay with the loader arm in the way. It covers bolt removal order, the stuck/corroded connector problem solved by cutting the stud, reinstallation angles, and a warning against over-torquing the new starter's housing. Useful for owners facing the same repair, less so for shoppers wanting specs or a walkaround.
Posted by the Whiterock Homestead channel, an owner doing their own repair on their own tractor rather than a dealer or reviewer.
Take bolts out one at a time. The first needs only a socket, the back bolt needs a three inch extension, and the bottom bolt needs a six inch and three inch extension with a swivel due to the loader arm blocking access.
After trying channel locks, a wrench, and a crescent wrench with no luck because rust and heat welded it together, cut the bolt between the connectors since the new starter came with a new bolt stud.
Get it snug with a socket and swivel but do not over torque it, or the plastic housing will crack like it did on the original starter.