Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner walking through a fuel filter swap on their own Kioti DK35SE, covering the full sequence: closing the fuel valve, removing the bowl, cleaning debris and O-rings, seating the new filter and spring, torquing the ring, and bleeding the fuel system. Includes a practical heads-up that replacement O-rings may not come with the filter. Useful for DK35 owners tackling this job for the first time.
Close the fuel valve, unscrew the ring to release the filter bowl, clean out debris and O-rings, push the new filter on, seat the spring, screw the ring hand tight, then bleed the system.
No, the owner found the fuel filter did not come with replacement O-rings, so you may need to ask for or order them separately.
Turn the fuel valve to the air bleeding position, crank until fuel in the filter port goes over three-quarter level, turn valve to on, unscrew the bleeding bolt, crank again, then tighten the bolt.