Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video follows the owner cutting first-cutting hay with a sickle bar mower pulled by a TYM tractor, and the title's warning proves accurate: a swath board repair and a blown PTO shaft u-joint bearing eat up most of the day, shown with hands-on fixes. It also covers the TYM's three-point position control and mirror visibility for monitoring the mower. Best for owners troubleshooting sickle bar breakdowns rather than those wanting a clean cutting demo.
An owner-operator documenting real homestead work and equipment breakdowns on their own property, not a polished or sponsored demo.
Slide off the old bearing halves, keep the needle bearings inside, press in the new bearing at a 45 degree angle, install retaining clips, then grease it through the zerk until it shows at the seals.
The spring on the swath board broke, and it was not even the right spring to begin with, so the board moved around instead of folding grass back properly.
A big wad of grass wrapped around the PTO shaft, which blew out the u-joint bearing near where the shaft connects to the tractor.
The lever position in the cab corresponds directly to the three-point arm position, so you can set a stop that lowers the mower to the same height every time.