Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An official step-by-step instructional video covering how to detach and reattach the frame-mounted B75 or B90 backhoe on the YT235, YT347, and YT359. It walks through every stage in sequence, positioning, pin removal, hydraulic line disconnection, block placement, and reinstallation, with specific safety callouts throughout. About seven minutes of narrated procedure with no hands-on field footage. Most useful to new owners doing this task for the first time.
Posted by the YANMAR//Academy channel, making this an official manufacturer training video with a procedural, safety-focused tone.
Position the tractor level, remove the swing lock pin and transport bar, center and lower the boom to 90 degrees, remove subframe pins, lift the backhoe out with the stabilizers, and lower it onto six-inch blocks.
The blocks should be six inches, placed under the backhoe main frame so it can be lowered onto them with the boom and arm staying at a 90-degree angle.
Back the tractor into position, connect the pressure and return lines, lift the backhoe above the lower hooks, align the upper holes with the subframe, and insert the mounting pins.
Failure to join the tractor pressure and return lines could cause damage to the hydraulic system, so connecting them correctly is required during removal and reinstallation.
