Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Mike and a 20-year dealership mechanic named Sam walk through five specific failure points caused by skipped greasing: loader pivot pins, steering knuckles and tie rods, clutch and brake pedals, PTO U-joints, and the cutter tail wheel, plus mower deck spindles as a bonus sixth. They name real consequences and rough repair costs, and briefly cover gearbox oil level. Best for newer tractor owners who want a practical pre-season checklist rather than a deep spec discussion. Note that Mike plugs his own branded grease gun mid-video.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Basically every eight to ten hours of operation you need to be greasing the tractor, and if mowing more than eight to ten hours, grease the cutter again.
Filling it too full causes more failures. The gearbox should only be filled to about halfway, not completely to the top, using 80-90 weight gear oil.
It is metal to metal with no bushings or wear pads, so without regular grease it wears quickly, potentially causing a 400 to 500 dollar repair since the stem is one unit.
Pins and bushings wear out, and if abused long enough it eats into the knuckle itself, requiring replacement or cutting and rewelding the loader arms or knuckle.