Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner troubleshooting persistent belt squeal and overheating on his 2014 New Holland T4.75 at around 800 hours. He walks through his diagnostic process, identifies the original thin OEM belt as the culprit, and shares a specific NAPA Gates Fleet Runner replacement part number at roughly $65 for two belts. He also flags loose transmission bolts and driveshaft carrier bolts as separate safety concerns worth Loctite-ing. Most useful to T4.75 owners chasing similar symptoms.
The original OEM belt is thin and shiny with no grip, causing the AC compressor and fan belt to slip, which stops the fan from pulling air and leads to overheating.
A NAPA Gates Fleet Runner micro V-belt, 54.25 inches long with a green back, fixed the squeal and made the fan blow much harder, for about 65 dollars for two belts.
Check the bolts where the transmission bolts to the rear end and the driveshaft carrier bearing bolts underneath, since these can vibrate loose and cause oil seepage or separation.