Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A real-time DIY install log of the Coyote third-function kit on a Kioti CK2610 ROPS tractor, filmed outdoors without a shop floor. The owner walks through removing the rear tire and fender, sorting out confusing part-number mismatches in the instructions, routing hydraulic hoses, and wiring the joystick diverter plugs. Useful specifically for ROPS owners with a horizontal double-valve who want an honest account of where the instructions fall short.
Look at the valve body; the horizontal double valve has a cap on the back and valves arranged side by side, unlike the vertical version used on cabin tractors.
No, the part numbers in the instructions did not match the actual kit; for example, part 18 in the manual was part 21 on the real kit.
The inside plug should be closed, used for the lift or roll back function, and the outside plug should be open, used for the dump function.
A Zerk fitting people often can't find is located near the rear remote or three point lift area, visible once the fender is removed.