Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an unboxing and first-hookup video, not a performance test: the owner walks around a newly purchased King Kutter 8-foot heavy-duty grader blade on his Kubota M6060, pointing out the reinforced construction, dual cutting edge, and pivot/angle mechanism, then struggles through mounting it with category 1/2 pin swaps. No actual scraping, grading, or ditch-digging is shown. Best for buyers wanting a close physical look and hookup troubleshooting before deployment.
A box blade can't move material to one side in one pass; it collects material behind it, which doesn't work well for clearing snow on his driveway.
The factory hitch pins were on the inside, making lift arms too narrow for the top link to reach, so he had to swap pins to the outside and change to category 2 pins.
The owner says it weighs almost 900 pounds, compared to typical six to seven foot blades that only weigh three to four hundred pounds.
Yes, it has a dual cutting edge that is bolted on, so when one edge wears out you can flip it over or replace it.