Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a straightforward controls-and-safety walkthrough for the Workmaster 25 Hydro, not a review or field test. It covers mounting the tractor, seat and belt setup, starting procedure, gear/4WD/PTO levers, hitch and hydraulics controls, differential lock, cruise control, and loader operation including bucket leveling and hill-driving safety. There's no pricing, work demo, or comparison content. Best suited for new owners learning where the controls are before their first time driving it.
Posted by the BRIM TRACTOR channel, presented as an instructional operating guide rather than a sales pitch.
Turn the key one click and wait for the engine heater glow light to go off, then turn the key the rest of the way to start it and release the parking brake.
Move the loader lever down to raise the bucket, left to curl, right to dump, and forward to lower it, with a float function past the detent for back blading.
Only go up and down the hill, not across it, and back up the hill with a heavy load so the tractor doesn't flip backwards.
Press the rear differential locker with your heel on the left side above the floorboard to lock both rear tires for more traction.
