Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A hands-on field repair of the fuel filter on a 2013 Mahindra MAX22 HST, done as a favor at a friend's location without a full tool kit. The video walks through accessing the filter housing, improvising clamps, extracting a visibly fouled element, catching a hidden O-ring the dealer's replacement part omitted, reassembling carefully, and bleeding air from the fuel system using the glow-lock method. Most useful to DIY owners doing this job for the first time.
Open the hood and side panel, pinch the fuel lines, unscrew the housing counterclockwise, remove the old filter, clean the housing, transfer O-rings, and install the new filter matching the grooves.
No, the video shows the dealer-supplied replacement filter was missing two O-rings, including a hidden one found inside the old part, which had to be transferred manually.
Turn the starter key to the glow lock position for 30 seconds to move air through the system, then start the engine and check for hesitation at idle.
The manual says to replace it only if there are engine running problems, but the presenter disagrees, saying fuel cleanliness is important for the injection pump.