Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on the three-point flow control valve, this video explains what happens when it's accidentally closed, implement won't drop, and then shows Mike physically opening the valve with a wrench and adjusting it on a live bush hog. It also corrects a piece of advice he'd previously given a viewer and adds a practical tire-pressure tip for reducing three-point bounce on the road. Best for new owners puzzled by a stuck three-point hitch.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
The flow control valve, a knob between your ankles below the seat, is likely turned in too far, which stops the implement from dropping.
Using a 14mm wrench, turn the valve while it has pressure on it; you'll hear oil flow and the implement will lower, letting you set the speed.
No. A service manager with decades of experience confirmed it does not protect seals or pistons; bouncing still puts pressure on them, and failures are rare anyway.
The speaker found about 20 PSI in rear tires reduced bouncing and improved wear, and now runs 12 to 15 PSI; front tires should follow the manufacturer's sidewall rating.