Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A first-time owner walking through the full 50-hour break-in service on his Kioti CS2510 HST, showing the engine oil and filter change, both hydraulic filters (including a bent one he replaced early), air filter check, grease fittings, tire pressure specs, and front axle fluid level. He shares part numbers, a flexible-funnel tip, and honest mistakes like overfilling hydraulic fluid. Best for new CS2510 owners preparing to do this service themselves.
He used engine oil filter E6 2011-32443, hydraulic filter T2185-38031, and HST filter T2195-38031, plus oil, and said filters with oil cost right at 100 bucks from his dealer.
The recommended PSI is 32.7 for the front tires and 31 for the rear tires.
His dealer said it was not necessary, only oil change, greasing, and torque checks, but the owner's manual said to do it, so he changed both hydraulic filters anyway.
It is only about a gallon or 0.9 liters of fluid, and he noted his was low on oil in the front axle shortly after getting the tractor.