Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on DIY install video, not a review or walkaround: an owner installs a Summit Hydraulics third-function kit on a Workmaster 25S with a factory backhoe, covering valve assembly, torque specs, fitting types, hose routing, and how the backhoe's pressure-beyond circuit and pump lines interact with the loader valve. Part 1 stops after hydraulics are finished, before electrical hookup and testing. Best for owners doing this exact install themselves.
Posted by an owner (Raul) documenting his own third-function kit installation on his own tractor, not a dealer or professional installer.
| New Holland Workmaster 25S | LS Tractor MT125 | |
|---|---|---|
| PTO horsepower | 17.2 hp | 17.2 hp |
| Loader lift capacity | 2,078 lb | 1,960 lbs. |
| 3-point lift capacity | 992 lb at ball ends | 970 lbs. (At 24 in: 728) |
| Hydraulic flow | 4.6 gpm | 4.6 gpm |
