Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A solo owner walking through a clutch cable swap on a New Holland TN75 with a manual shuttle, filmed in a hay barn with a duct-taped phone mount. Covers removal, the tricky cable routing through the tight dogleg bend, a neighbor-assisted reinstall tip, and a quick look at the undercarriage clutch adjustment point. Shallow on visuals due to tight space, but the verbal narration of the steps and gotchas is useful for anyone attempting the same job.
Remove the nut and rubber grommet, pull out the old cable sheath, then thread the new cable down through the hole in the clutch pedal and reattach the nut and linkage underneath.
The cable has a dogleg bend that must be held straight while threading it through a tight hole, making it hard to manage alone without help.
It is underneath the tractor near where the clutch cable linkage connects, marked by a shiny adjustment point with a jam nut on it.
No, the video states that if you have a shuttle shift version you will not have this problem, since this tractor has a manual shuttle.