Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator documents the full process of swapping a broken boom cylinder on a Branson BH76 backhoe after snapping the piston threads while jackhammering rock. The video walks through pin removal with improvised tools, aligning and seating the new cylinder, reconnecting hydraulic hoses, and a final pressure test. He closes by noting the replacement ran about $1,500. Useful for anyone facing the same repair on this backhoe.
The ram inside the cylinder had a threaded end with a nut holding the piston, and those threads snapped off while jackhammering rock during a trenching job.
Take pressure off the pin using a farm jack, then spread the spring clips in the groove with a screwdriver before pulling the pin out.
The replacement cylinder ran about $1,500, which the owner called an expensive mistake.
After reconnecting the hydraulic hoses, start the tractor and run the cylinder to check it pressurizes with no leaks at the hose connections.