Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a quick DIY fix for a specific, recurring problem on the Kubota BX2380: leaky front-end loader quick connects. Tim replaces the factory quick couplers with quarter-inch flat-faced quick couplers and 3/4 JIC-to-quarter-inch MPT fittings sourced from Summit Hydraulics, noting the stock design tends to leak again after a dealer fix. Short and practical, best for owners already dealing with this exact leak.
Posted by the Tim Bockin channel, an owner sharing a hands-on fix from his own tractor.
Tim says the stock quick connect design is prone to leaking again, even after a dealer installs new ones, sometimes within thirty hours.
Quarter inch flat faced quick couplers and 3/4 JIC by quarter inch MPT fittings, both sourced from Summit Hydraulics, were used to replace the factory parts.
Use the blue, red, yellow, and white spacers on each connector so you can keep track of which line goes where when reassembling.
