Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This four-minute video has one specific purpose: eyeballed tape-measure dimensions of the LS MT232, rear tire width (~67.5"), front tire width (~55"), loader bucket width (~66.25"), max loader height (~83.5"), ROPS height (~96"), and front-to-back wheelbase (~105"). The presenter explicitly frames it around practical fit questions: shop doors, gates, dump trailers. Useful if you need quick clearance numbers, but note all measurements are eyeballed on uneven ground and may be slightly off.
Eyeballing the measurement, the presenter estimates about 67 and a half inches for the rear tire width.
The loader reaches roughly 83 and a half inches at max height, useful for checking if it clears a dump trailer.
The ROPS arm height is about 96 inches, measured as 95 and three quarters to be tight.
The front-to-back wheelbase measures roughly 105 inches, noted as shorter than the 42 series models.