Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner doing his own first 50-hour service on a Branson 5220R, covering both engine oil/filter and the full 9.7-gallon hydraulic-transmission fluid drain and filter swap. He calls out specific socket sizes (17mm, 11/16"), notes factory-tight filters, explains how he refilled and cycled the hydros to get the level right, and mentions the OTC 2352 hand pump as a key tool. Most useful to DIY owners preparing for this job.
The engine drain bolt is 17 millimeters, and the transmission drain bolt uses an 11/16 inch socket since no metric size fit correctly.
The video shows draining 9.7 gallons of hydraulic transmission fluid, requiring multiple buckets to catch it all.
He used an OTC 2352 hand pump with five-gallon buckets, filled halfway, then ran the tractor and cycled all the hydros to bring the level up correctly.
Yes, the video notes the factory installed it very tight, making it difficult to get off during the 50-hour service.