Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Stands out as a practical field repair video, not a buying guide. Mike walks through replacing the hydraulic oil cooler on New Holland TC and Case DX 35-45 hp hydrostatic tractors (roughly 2003-2011), covering how to identify the leak, remove the cooler with just a 10mm socket and adjustable wrench, test it by blowing air through it, and bleed the hydraulic system using a ~$40 vacuum tool from O'Reilly. Best for owners already facing this specific failure.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
You'll notice a seeping leak in front of the radiator, often mixed with debris, that can turn into hydraulic oil coming out everywhere if it fully fails.
Just a 10mm socket for the four mounting studs and an adjustable wrench or pliers to hold the cooler steady while removing the inlet and outlet hose fittings.
Blow through one of the inlet or outlet holes with your finger over the other hole; if air comes out the other side, the cooler is cracked and failing.
Fill the cooler with hydraulic oil before mounting it, then use a vacuum tool, like one bought at O'Reilly for about 40 dollars, to pull air from both sides.