Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on repair walkthrough for a John Deere 2210 losing power due to a suspected clogged fuel tank, filmed by an owner troubleshooting the issue on his own machine. It covers removing the hood, unbolting and lifting out the tank, freeing stuck fuel lines, cleaning the tank and filter, spotting a missing throttle pin during reassembly, and refilling and test-running the tractor. Useful for 2210 owners diagnosing similar power loss or planning a fuel tank removal themselves.
Posted by an owner-operator documenting a real repair on his own John Deere 2210, figuring out the process as he goes rather than presenting expert credentials.
The owner suspected something was clogging the fuel tank since there is no pump between the tank and filter, so a clog would cause weak fuel flow and power loss.
Remove the hood, take out two 10 mm bolts holding the tank, disconnect the gauge wire and hoses, remove the back cover if it hits a bracket, then pull the tank free.
Check that the throttle lever pin is still in place, since it can bump out during removal and is easy to miss until reassembly.
