Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A guest hydraulic expert walks through diagnosing and fixing a stuck electrically operated diverter or third-function valve, the kind sold through the channel's own website. Covers why spools seize (moisture, infrequent use), how to remove and clean the spool and o-rings with basic wrenches, reassembly torque guidance, and a preventive tip. Also briefly addresses Summit-style valves. Best for owners with a non-responsive diverter who want a step-by-step teardown rather than just a parts-swap recommendation.
The spool inside sticks from moisture in the air and hydraulic fluid, often because the tractor is started briefly without the fluid heating up enough to boil moisture out.
Unhook power, remove the coil nut with a 7/8 inch wrench, then remove the spool with a one-inch wrench, clean it and the o-rings, and reassemble snugly.
Operate the valve every time you use the tractor, clicking the button even with nothing connected, to keep the spool moving and freed up.
Yes, you can often push the spool with a brass punch through the center access point to free corrosion and resistance, working it a few times.