Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a product demo, not a tractor review: the maker of a new hydraulic skid steer quick-attach kit walks through how it works, using your third function to swap buckets, forks, or grapples without leaving the seat. He shows coupler options, a grapple fitting clearance fix, and fitment notes for Kubota O1/O2, 60-series, and likely MX models. Best for buyers researching this specific accessory, not general tractor shoppers.
Posted by 5Eleven DesignZ, a company that designs and sells tractor accessories, so this is a vendor demo for their own product rather than an independent review.
It connects through your third function, letting you plug in a bucket, pallet forks, or a grapple and swap attachments without leaving the seat.
Yes, it currently fits O1 and O2 series as well as 60 series, and likely MX models and many older models too.
The standard is half inch AG quick couplers, with flat face couplers also available as an option.
The 45 degree street elbows were moved from the center of the cylinder to the lower part, with 90 degree street elbows added for clearance.
| Kubota L2501 | Kubota L6060 | |
|---|---|---|
| PTO horsepower | 19 hp | 53 hp |
| Loader lift capacity | 2,373 lbf (at pivot pin) | 3,171 lbf |
| 3-point lift capacity | 1,918 lb | 3,858 lb |
| Hydraulic flow | 5.15 gpm | 9.4 gpm |