Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This short owner-shot video focuses on two specific tasks: removing the RK24's backhoe attachment and then mounting and angling a box blade for swale work. It walks through pin removal, three-point hitch connection, top link setup, and adjusting the blade tilt by threading the turnbuckle. No specs or loader content, best for RK24 owners tackling their first implement swap.
Posted by the ProCut channel, which appears to be an owner-operator documenting work on their own property.
Remove the pins holding the bottom lift arm legs, using pliers if a cotter pin is missing, then set the tool aside and disconnect the top link.
Put the non-adjustable leg on one side and the adjustable leg on the other, using the lower mounting hole, then pin everything and attach the top link.
Loosen the jam nut on the turnbuckle and tighten or loosen it to raise or lower one side, changing the blade's tilt for the swale.
