Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused fix-it tutorial for a seized PTO shaft that won't slide apart. Mike walks through two specific remedies in order: soaking the male/female joint with penetrant spray, then using a pipe-as-drift-punch technique to hammer it free without bending the grease zerk. He also covers reassembly, the flat-lobe alignment trick, and when a bent shaft means a machine-shop visit. Useful for anyone whose shaft is rust-frozen from sitting outside.
Tractor Mike is a longtime tractor-industry insider with decades of hands-on experience in the equipment business. He built his channel to help first-time and rural buyers make confident decisions, and his guidance comes from that deep, long-term background rather than a sales pitch.
Spray WD-40 Rust Release Penetrant into the male and female parts, let it soak, rotate the blades, then try pulling apart; repeat if needed.
Use a pipe that fits the front half of the PTO yoke as a drift punch, hammering forward while avoiding the grease zerk.
Line up the one flat lobe on the three-lobed male and female parts before sliding them together, then apply penetrant and test it slides freely.
The shaft may be bent; take it to a machine shop to cut and replace the shaft section, or try pulling it apart with a come-along.