Pick a make and model. Full spec sheet, tractor videos, and similar tractors on one page.
Find a model →Compare up to four models side by side. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →What sets this apart is its beginner-honest framing: Lucas discovered his PTO slip clutch needed break-in and adjustment after a viewer tip, not prior experience. He walks through the exact procedure for a Bomal light mulcher, loosening bolts two turns, running the PTO to let plates slip, confirming slip with marker lines, then retightening, at a practical how-to depth. Best for new implement owners unfamiliar with slip clutch break-in.
The clutch may not be adjusted or burned in properly, sometimes because the clutch plates were stuck from the factory, causing it to grab too hard instead of slipping.
Loosen the spring bolts two revolutions, engage the PTO to let the clutch slip a little, confirm slip with marker lines, then tighten the bolts back two revolutions.
Mark the PTO shaft and clutch assembly with a marker before engaging the PTO, then check afterward to see if the marks no longer line up.