Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on owner walkthrough of a Mahindra 2555 HST focused on three-point hookup mechanics, the difference between self-centering and stay-engaged hydraulic levers (and why the backhoe needs the latter), lift-arm height adjustment, and folding the rollbar for low barn clearance. It also covers mounting/dismounting safety around the loader and notes the lack of a 4WD indicator light. Good for current or prospective owners wanting real operational detail rather than a sales pitch.
Posted by the AllThingsDIY Mike channel, an owner sharing practical, hands-on impressions from using his own tractor.
The bottom set self-centers back to neutral when released. The top set stays engaged, continuing to pump fluid forward or backward even after you let go of the lever.
The backhoe needs continuous fluid flow to operate its control levers. If the lever returned to neutral, fluid would stop pumping to the back and the backhoe levers would not work.
Pull the pin out on each side and lower the rollbar down. It is not light, so the owner uses a helper handle to raise or lower it.
Push down a lever that slides a mount in and out a couple inches so you do not need perfect alignment, hook the fixed side, adjust the other arm onto its pin, then connect and screw in the top link.
